If you have uniform boxes throughout your logistic center or your production, you can use this PSI ZPC roller conveyor system with 2 rows of single rollers.
These rollers can be delivered with or without tires of softer Polyurethane and run very quietly. The DC-motors for each conveyor zone is installed inside the conveyor frames, and does not disturb.
If you have boxes, and trays, which are slightly different or conical, then you can use the PSI ZPC roller conveyor system with 2 rows of double conveyor-rollers.
These conveyor-roller corpus can be delivered with or without tires of softer Polyurethane and run very quiet.
For any other Roller-combination, see “Rollers”.
If you have boxes, and/or trays in different sizes or conical, then you can use the PSI ZPC system with conveyor-roller-corpus and spacers. These conveyor-rollers can be delivered with or without tires of softer Polyurethane and run very quiet.
This PSI roller conveyor-system can be made with a min. pitch of 40 mm. That means you can transport very small goods from 120 mm length without having to use rollers of smaller diameters. These roller-corpus are also available as friction drive for low pressure accumulation and partly in curves.
For different sizes of goods – as very small, large or mixed cartons – you may use the full width PSI “multiblock” conveyor-rollers made with or without soft tires of Polyurethane.
These conveyor rollers are also available as friction-drive rollers for low pressure accumulation.
80% of all units with flat base, as cartons boxes, trays, tablets, work-piece holders and so on, can be handled and transported worldwide in logistics and distribution centers with these PSI conveyors
The PSI Conveyor Gate is specially designed with a button on both sides with a red/green LED light. This button is integrated into the ZPC PSI control system.
Pressing this button activates blinking red lights. All goods behind the gate stop and accumulate with zero pressure, while the goods on the Conveyor Gate are transported forward.
Then the light turns green and the PSI Conveyor Gate can be easily opened and allows a secure passage. When the Gate is closed again, the ZPC function begins to transport the goods as normal.